top of page
SF6100 CW/QCW 25 A 40 V OEM laser diode driver board

High-power OEM laser diode driver for multi-emitter pump modules: up to 25 A at up to 40 V — 1 kW in a 61 × 57.9 × 30 mm half-brick package with 95–97% efficiency. Built for 150–330 W fiber-coupled pumps at 915 and 976 nm used in kilowatt fiber lasers. CW and QCW operation, analog or digital control, and multiple layers of laser protection. Pay by card, Apple Pay, Google Pay, PayPal or bank transfer.


Downloads: Manual SF6100 (PDF) · Software and drivers · 3D model (STEP)


Other versions: benchtop · TEC controller · NH8 (multichannel hub) · 15 A · below 5 V · high-current diode bars


LASER DIODE CURRENT & VOLTAGE

  • Output Current Range (I): 0 ~ 25 Amps

  • Output Voltage (0.73*Vin max) (V): 5 ~ 40 Volts

  • Minimum Current Set-Point Step Size: 0.01 Amps

  • Rise Time: (Iout = 12,5A) min - 140μs; max - 300μs

  • Rise Time: (Iout = 25A) min - 130μs; max - 250μs

  • Fall Time: min - 10μs; max - 50μs

  • Current Stability: <0.2 %

  • Current Ripple: 15–25 mA

  • Current Setpoint Absolute Accuracy: <1 %

LASER DIODE PROTECTION

  • Soft-Start Current Ramp to User Set-Point

  • User Adjustable Current Limit

  • Over-Current Protection Shutdown

  • Over-Temperature Warning & Shut-Down

  • Reverse Current Protection

  • Crowbar Circuit Protection

  • Disable Input

  • Interlock

DIMENSIONS AND WEIGHT

  • Dimensions: 61 mm x 57.9 mm x 30 mm

  • Weight: 162 g

USER INTERFACE

  • Analog Control Signal Connector

  • Digital control: RS-232 / UART (included)

  • Optional adapters: USB (+€20), Bluetooth (+€60, needed for the Android app)

  • Enable / Disable Input Signal Input

DRIVER INPUT

  • Input Voltage Range (Vin): 12 VDC ~ 55 VDC

PACKAGE SET

  • Driver – 1 pcs

  • 50 cm ribbon cable with one 8-pin connector – 1 pcs

  • 50 cm ribbon cable with one 14-pin connector – 1 pcs

  • Wires fixing set – 1 pcs

  • Datasheet & User Manual – 1 pcs

WARRANTY PERIOD

  • 1-year manufacturer's warranty

High Voltage Laser Diode Driver OEM CW/QCW 25 A 40 V - SF6100

400,00 €Price
Quantity
  • Ultra-compact: 1 kW (25 A at 40 V) in a 61 × 57.9 × 30 mm half-brick, about 9 W/cm³

  • CW and QCW operation, output voltage 5–40 V

  • Efficiency 95–97%

  • Low current ripple: 15–25 mA

  • Wide input range: 12–55 V DC

  • QCW mode 0.1–100 Hz, pulses from 0.5 ms; rise time 130–250 µs, fall time 10–50 µs

  • Digital setting in 0.01 A steps; analog control 5 A/V; current calibration within ±5%

  • Laser protection: soft-start, adjustable current limit, over-current shutdown within 7 µs, crowbar (100–200 ns), reverse-current protection

  • Thermal protection: driver warning at 60 °C and shutdown at 80 °C; NTC input to switch off an overheating laser

  • Safety inputs: interlock and enable

  • Monitoring: current (5 A/V) and voltage (5 V/V) monitor outputs

  • Control: analog inputs, RS-232/UART (included)

  • Optional adapters: USB (+€20), Bluetooth (+€60, needed for the Android app)

  • Free PC software, LabVIEW and Python drivers; Android app via Bluetooth adapter

  • Multichannel: connect up to 8 drivers and TEC controllers to one NH8 hub (+€280) and control them from free software; up to 32 devices with several hubs

  • RoHS3 compliant

bottom of page